Wall Blind Corner Cabinet Check the Wall Outline for distance that the Blind Corner Cabinet is pulled away from the corner. The maximum pull-out distance is 3". Measure Fastener Holes Measure from Wall Outline to the wall studs that will support the cabinet. Use Spacer to transfer these wall stud positions to the top and bottom hang rails (see "Measure Fastener Holes", page 15). Predrill Fastener Holes At wall stud locations predrill 7/32" holes through back of cabinet (see "Predrill Fastener Holes", page 15). Fasten Cabinet Figure 8 Lift Blind Corner Cabinet onto supports. When positioning, add spacer so cabinet back width matches Wall Outline.Fasten cabinet (see "Shim, Level, and Fasten", page 16). Attach Filler to Adjacent Cabinet Figure 9 Before lifting adjacent cabinet to the Blind Corner Cabinet, align Filler/Panel with bottom and front of the adjacent cabinet Face Frame. Clamp the Filler/Panel in place. Predrill (see "Drill and Fasten Face Frames", page 14) through the cabinet Face Frame into the Filler. Fasten Filler with Face Frame Screws.