Predrill
Fastener Holes
Predrill cabinets before they are moved into place.
NOTE: To avoid "breakout" or splintering of cabinet
back, don't press hard on drill. Use a sharp bit and let the bit do
the work gradually.
At wall stud location marks, predrill 7/32" holes through Hang
Rails on cabinet exterior.
Filler Placement for Tall Cabinets
Determine if Filler is needed:
Figure
3
- When
installing a 24" Deep Tall Cabinet next to a 24" Deep
Base and 12" Deep Wall Cabinet combination, a Filler or Full
Height Panel (not shown) is required to fill the space between
the Wall Cabinet Face Frame and the side of the Tall Cabinet to
maintain equal spacing.
Figure
4
- When
installing a 12" Deep Tall Cabinet next to a 24" Deep
Base and 12" Deep Wall Cabinet combination, a Filler or Base
End Panel (not shown) is required to fill the space between the
Tall Cabinet Face Frame and the side of the Base Cabinet to maintain
equal spacing.
- If
equal spacing of Wall and Base Cabinets is not required, no Filler
or Panel is needed.
If Filler is used, cut Filler equal to height of the Wall or Base
Cabinet Face Frame. Filler width should match the space from the
cabinet side to the front Face Frame edge. Before positioning Tall
Cabinet, attach Filler to the Face Frame edge of the Wall Cabinet
(Figure 3) or Tall Cabinet (Figure 4) using appropriate length screw
(not provided).
Position, Shim, Level, Clamp and Fasten
Adjacent Cabinet
Follow these steps to attach adjacent cabinets:
|
 |
|
