Our most popular accessory, the Base Tray Kit is a roll-out shelf tray that makes reaching for things stored in the back of your cabinets easier. Add a second tray for better storage and even more functionality in your kitchen. In your base cabinets you can install one tray at the bottom of the cabinet and one in the center - these will keep you from crawling on your knees to look for something in the back of the cabinet. The kit is simple to install and includes all necessary hardware. Measurements listed are the width of the tray. To measure, open the door and measure the width of the cabinet opening to ensure proper fit. Base Tray Kits are for Merillat Classic 24" Deep Base Cabinets ONLY. Note: Any cabinet over 27" with a center stile will need 2 trays ordered.
|Item||Tray Width||For Use In:|
|BTK12||8 3/4"||B12, B12FH, BCD24DL/R-4D, SB12, UB12, UB12FH|
|BTK15||11 3/4"||B15, B15FH, B30, B30FH, BCD30DL/R-4D, DSB30, SB15, SB30, SB30FH, U158424, U159024, U159324, U159624, UB15, UB15FH|
|BTK18||14 3/4"||B18, B18FH, B36, B36FH, B54, BCD36DL/R-4D, DSB36, SB18, SB36, SB36FH, U188424, U189024, U189324, U189624, UB18, UB18FH|
|BTK21||17 3/4"||B21, B21FH, B42, B42FH, SB21, SB42, SB42FH, UB21, UB42, UB42FH|
|BTK24||20 3/4"||B24, B24B, B24FH, B24BFH, PBBC24/27, PBBC24/27B, B48, B48FH, SB24, SB24B, SB24FH, SB48, SB48FH, U24824, U248424B, U249024, U249024B, U249324, U249324B, U249624, U249624B, UB24, UB24B, UB24FH, UB24BFH, UB48FH, UBT24B|
|BTK27B||23 3/4"||B27B, B27BFH, SB27B, SB27BFH, UB27B, UB27BFH|
|BTK30B||26 3/4"||B30B, B30BFH, SB30B, SB30BFH, U308424B, U309024B, U309324B, U309624B, U30B, UB30BFH|
|BTK33||13 1/4"||B33, B33FH, BBC42/45, DSB33, SB33, SB33FH|
|BTK33B||29 3/4"||B33B, B33BFH,SB33B, SB33BFH, UB33B, UB33BFH|
|BTK36B||32 3/4"||B36B, B36BFH, SB36B, SB36BFH, U368424B, U369024B, U369324B, U369624B|
|BTK39||16 1/4"||B39, B39FH, BBC45/48, SB39, SB39FH, UB39FH|
|BTK45||19 1/4"||B45, B45FH, BBC48/51, UB45FH|
*This accessory item is not compatible with Merillat cabinetry purchased prior to 1998.
**Not compatible with Merillat Masterpiece, Merillat Essentials, or Merillat Basics product lines.
Previous | Showing reviews 21-30 of 30
Posted by Unknown on Sep 15th 2016
These are so easy to install and the cabinets have the holes and fittings. I initially thought I needed a handyman to install, but it takes more effort to unpack the box vs. the actual install. Now everything is organized, we increased our useable storage, and it is significantly easier to reach down and get things.
Posted by Unknown on Aug 19th 2016
The cabnet draw was the same has the other 5 that where installed in my cabnets
Posted by Steve on Apr 19th 2016
The base tray kit fit perfect and was very easy to install.
Posted by Mary Holt on Mar 15th 2016
Glad to get the product, love the shipping rate.
Posted by Unknown on Jan 13th 2016
Easy to install. Perfect match
Posted by Trevor on Dec 1st 2015
I ordered 11 pull outs. 10 arrived in reasonable condition but 1 was destroyed. It had been taped back together but the side rails were missing and the slide out was damaged.
Posted by Mike on Nov 2nd 2015
The plastic inserts cannot be removed without breaking them and you cannot order replacements.
Posted by Mark Thomas on Oct 11th 2015
High quality product. I'm going back and adding them to all my cabinets.
Posted by Ray on Oct 11th 2015
Base tray kit looks very nice and seems to be good quality construction. However, the base trays ($500+ order) I received were all too wide. The next closest size in the order list was more than 2 inches larger/smaller. The trays I received were all 1/4 inch wider than the old trays!! Although the tray would fit into the cabinet opening, there was no room for the tray hardware. I had to use a woodworking tools to notch out 1/8 inch slots so the hardware would fit. I do not recommend ordering these trays unless you are prepared to perform carpentry on your cabinets to make the trays fit.
Posted by Unknown on Apr 28th 2015
I wanted to add a drawer to my existing Merillat kitchen cabinet and the drawer width (14.75") was exactly right for the opening. However the hardware adds enough width that the drawing won't fit in the track. The new drawer is built 1/4" wider than the previous drawer for some reason so doesn't work with circa 1988-90 cabinets. I am very disappointed, and out $70 as well. Both the drawer and the hardware seem to be solidly made, however.
Previous | Showing reviews 21-30 of 30