Our most popular accessory, the Base Tray Kit is a roll-out shelf tray that makes reaching for things stored in the back of your cabinets easier. Add a second tray for better storage and even more functionality in your kitchen. In your base cabinets you can install one tray at the bottom of the cabinet and one in the center - these will keep you from crawling on your knees to look for something in the back of the cabinet. The kit is simple to install and includes all necessary hardware. Measurements listed are the width of the tray. To measure, open the door and measure the width of the cabinet opening to ensure proper fit. Base Tray Kits are for Merillat Classic 24" Deep Base Cabinets ONLY. Note: Any cabinet over 27" with a center stile will need 2 trays ordered.
|Item||Tray Width||For Use In:|
|BTK12||8 3/4"||B12, B12FH, BCD24DL/R-4D, SB12, UB12, UB12FH|
|BTK15||11 3/4"||B15, B15FH, B30, B30FH, BCD30DL/R-4D, DSB30, SB15, SB30, SB30FH, U158424, U159024, U159324, U159624, UB15, UB15FH|
|BTK18||14 3/4"||B18, B18FH, B36, B36FH, B54, BCD36DL/R-4D, DSB36, SB18, SB36, SB36FH, U188424, U189024, U189324, U189624, UB18, UB18FH|
|BTK21||17 3/4"||B21, B21FH, B42, B42FH, SB21, SB42, SB42FH, UB21, UB42, UB42FH|
|BTK24||20 3/4"||B24, B24B, B24FH, B24BFH, PBBC24/27, PBBC24/27B, B48, B48FH, SB24, SB24B, SB24FH, SB48, SB48FH, U24824, U248424B, U249024, U249024B, U249324, U249324B, U249624, U249624B, UB24, UB24B, UB24FH, UB24BFH, UB48FH, UBT24B|
|BTK27B||23 3/4"||B27B, B27BFH, SB27B, SB27BFH, UB27B, UB27BFH|
|BTK30B||26 3/4"||B30B, B30BFH, SB30B, SB30BFH, U308424B, U309024B, U309324B, U309624B, U30B, UB30BFH|
|BTK33||13 1/4"||B33, B33FH, BBC42/45, DSB33, SB33, SB33FH|
|BTK33B||29 3/4"||B33B, B33BFH,SB33B, SB33BFH, UB33B, UB33BFH|
|BTK36B||32 3/4"||B36B, B36BFH, SB36B, SB36BFH, U368424B, U369024B, U369324B, U369624B|
|BTK39||16 1/4"||B39, B39FH, BBC45/48, SB39, SB39FH, UB39FH|
|BTK45||19 1/4"||B45, B45FH, BBC48/51, UB45FH|
*This accessory item is not compatible with Merillat cabinetry purchased prior to 1998.
**Not compatible with Merillat Masterpiece, Merillat Essentials, or Merillat Basics product lines.
Posted by Glenn Kroll on Feb 21st 2017
Posted by Marie Muth on Feb 12th 2017
This is the second set of base trays we have ordered. The first set installed easily. The trays fit well and are just the solution to being able to reach the back of low cabinets. This set, however, was missing one bag of brackets and screws. Luckily we had a spare bag or we would not have been able to install all 6 trays. Also, this time the screws were very difficult to drive into the plastic brackets. This made for a very tedious install.
Posted by Pauline A Thomas on Jan 28th 2017
The draws fit perfectly and my husband installed them with no problems at all!!
Posted by John on Jan 4th 2017
Box was damaged, rail was bent, If there was something attached to the two small screw, it was missing. Not sure if there was supposed to be instructions.
Looks like from the reviews it is an ongoing problem which I would attribute to your carrier.
Posted by Barry on Nov 12th 2016
Easy to install. Works great. Ordered three drawers. One box and drawer was smashed. Customer service was great and said another drawer would be sent out. Hopefully this drawer will be OK. Had ordered six previously and they were all OK.
Posted by Unknown on Nov 1st 2016
I bought 8 of these, 2 in one size, 6 in another. Hardware supplied is awesome and ample to complete the job. Of the 8, 2 were either poor quality control or damaged in shipping. One side of a large one, in a box that showed no damage, has an obviously cracked side near each corner ( which I will glue and clamp). The other, a smaller unit had a crooked side runner that had to be reinstalled to allow the unit to slide correctly. It still is off enough, that it won't hold much weight. However, working with that, these units make the cabinets far better to use, and certainly more convenient.
Posted by Rick on Oct 1st 2016
They were sooo easy to install!!!
Posted by Unknown on Sep 15th 2016
These are so easy to install and the cabinets have the holes and fittings. I initially thought I needed a handyman to install, but it takes more effort to unpack the box vs. the actual install. Now everything is organized, we increased our useable storage, and it is significantly easier to reach down and get things.
Posted by Unknown on Aug 19th 2016
The cabnet draw was the same has the other 5 that where installed in my cabnets
Posted by Steve on Apr 19th 2016
The base tray kit fit perfect and was very easy to install.