*For use with Merillat cabinets only.
*Not compatible with Merillat Masterpiece, Merillat Essentials or Merillat Basics products, or Merillat cabinetry purchased prior to 1998.
Item | Tray Width | For Use In: |
BTK12 | 8 3/4" | B12, B12FH, BCD24DL/R-4D, SB12, UB12, UB12FH |
BTK15 | 11 3/4" | B15, B15FH, B30, B30FH, BCD30DL/R-4D, DSB30, SB15, SB30, SB30FH, U158424, U159024, U159324, U159624, UB15, UB15FH |
BTK18 | 14 3/4" | B18, B18FH, B36, B36FH, B54, BCD36DL/R-4D, DSB36, SB18, SB36, SB36FH, U188424, U189024, U189324, U189624, UB18, UB18FH |
BTK21 | 17 3/4" | B21, B21FH, B42, B42FH, SB21, SB42, SB42FH, UB21, UB42, UB42FH |
BTK24 | 20 3/4" | B24, B24B, B24FH, B24BFH, PBBC24/27, PBBC24/27B, B48, B48FH, SB24, SB24B, SB24FH, SB48, SB48FH, U24824, U248424B, U249024, U249024B, U249324, U249324B, U249624, U249624B, UB24, UB24B, UB24FH, UB24BFH, UB48FH, UBT24B |
BTK27 | 10 1/4" | BBC39/42 |
BTK27B | 23 3/4" | B27B, B27BFH, SB27B, SB27BFH, UB27B, UB27BFH |
BTK30B | 26 3/4" | B30B, B30BFH, SB30B, SB30BFH, U308424B, U309024B, U309324B, U309624B, U30B, UB30BFH |
BTK33 | 13 1/4" | B33, B33FH, BBC42/45, DSB33, SB33, SB33FH |
BTK33B | 29 3/4" | B33B, B33BFH,SB33B, SB33BFH, UB33B, UB33BFH |
BTK36B | 32 3/4" | B36B, B36BFH, SB36B, SB36BFH, U368424B, U369024B, U369324B, U369624B |
BTK36/39 | 7 1/4" | BBC36/39 |
BTK39 | 16 1/4" | B39, B39FH, BBC45/48, SB39, SB39FH, UB39FH |
BTK45 | 19 1/4" | B45, B45FH, BBC48/51, UB45FH |
For California Consumers:
Previous | Showing reviews 71-80 of 133 | Next
Posted by Mark on Jan 31st 2019
I wound up ordering 6 of these pull-out drawers to replace the shelves in our pantry cabinets. Ordering was easy and shipping was both prompt and inexpensive. All drawers arrived in excellent condition.I found installation was easy due to precision fit of the drawers. A suggestion -- add better instructions for DYI installers who may not be familiar with this kind of job. Otherwise 5 stars.
Posted by Lauren R. on Jan 25th 2019
Install was easy and absolutely love the extra storage these pull out trays offer my kitchen. I was disappointed with the extended lead time (I found out after inquiring the status of my order that these products are made to order). After two weeks of waiting, both trays I ordered arrived damaged (track bent and nail piercing the wood).
Again, love the product, but quite disappointed in how it arrived.
Posted by Maria Pragluski on Dec 27th 2018
This product is the easiest install that I have ever experienced. My husband and I installed the tray drawer in less than 1/2 hour. Great product. I will be buying more of them.
Posted by Unknown on Dec 20th 2018
Item came as ordered , very well packed and was easy to replace the damaged unit.
Posted by Unknown on Dec 18th 2018
This shelf was easy to add to my kitchen and makes my cabinets more efficient.
Posted by Unknown on Nov 8th 2018
I ordered 10 drawers - for both Vanity and Standard base units, and they came in 10 (!!!) separate packages. Smaller drawers were in their own boxes and all of the units were protected with about six layers of bubble wrap with each nested inside a double-layered cardboard carton.
Beyond that, the installation is a snap. Push the glide rail into pre-drilled holes in the back of the cabinet and finish the installation with a single screw into another pre-drilled hole in the front.
Posted by Unknown on Nov 2nd 2018
Would have helped to know size of drill bit needed to make holes for side support brackets.
One of rear plastic "snap-in" supports broken in box when unpacked.
Otherwise, very good quality and work well.
Posted by Unknown on Sep 22nd 2018
The drawers arrived safely but the hardware to install them was missing, likely lost when the end of one box was destroyed during shipping and then resealed with parts missing. I had to have someone tell me what was needed and then go purchase the items. I love the drawers though and very glad the cabinets were pre-drilled. I previously ordered others without any problems.
Posted by Unknown on Sep 9th 2018
Great product. I have ordered them before. One minor issue this time - one of the rails attached to the drawer was bent. I was able to straiten it sufficiently to make the drawer work properly. For the other drawer, I wanted to install an extra one in the upper part of the cabinet. Measuring the right location for drilling the holes was a bit of a challenge, but it ended up working perfectly, so I've ended up with two upper trays and one lower one.
Posted by Andrew Jones on Sep 2nd 2018
Absolutely the easiest way to add a pull-out shelf to an existing Merillat cabinet.
Push the back glide support into the pre-drilled holes and screw the front of the glide into the pre-drilled hole. Done!